EM Coding Alert

Study these scenarios to understand correct care levels.

You know that if a patient receives critical care for a life-threatening condition and your documentation meets the critical care standards, you’ll report 99291 (Critical care, evaluation and management of the critically ill or critically injured patient; first 30-74 minutes) and possibly +99292 (... each additional 30 minutes (List separately in addition to code for primary service)) based on the amount of time involved.

But do you know when the situation meets the definition of critical care? Do you know what kind of documentation you will need to support that? And do you know your code choices when the situation cannot support using 99291/+99292?

Read on to find out all the options you have to keep your critical care claims clean.

Definition: According to the Centers for Medicare and Medicaid (CMS), “critical care is defined as the direct delivery by a physician(s) medical care for a critically ill or critically injured patient,” per the Medicare Claims Processing Manual, Chapter 12, Section 30.6.12. “A critical illness or injury acutely impairs one or more vital organ systems such that there is a high probability of imminent or life threatening deterioration in the patient’s condition.”

“Critically ill or injured implies that there is a risk of loss-of-life or loss-of-function/further loss-of-function of a major organ or organ system, with an acute or exacerbated presentation of the condition,” explains Joshua Tepperberg, CPC, senior coding analyst at Caduceus, Inc., in Jersey City, New Jersey.

Know the Particulars

Your notes must back up your patient’s condition to necessitate using 99291/+99292, which is why so many of these claims end up under review. According to Medicare, you must meet three criteria before billing for critical care services:

• The patient must meet the definition of critically ill/injured (vital organ failure; life-threatening health condition)
• The physician must perform the critical care service
• The critical care service must span a cumulative time of at least 30 minutes on a given date of service; any critical service provided for less than 30 minutes should be billed with the appropriate E/M code.

Warning: “There is an extreme need for physicians and their coding staffs to constantly work on understanding the E/M coding process, particularly the necessary supporting documentation,” says Duane C. Abbey, PhD, president of Abbey and Abbey Consultants Inc., in Ames, Iowa.

Consider these E/M coding examples to avoid critical care service snafus.

Scenario 1: Use An E/M Code

A patient presents to a practice for chemotherapy and has an anaphylactic reaction while she’s in the office. The physician administers an epinephrine injection intramuscularly and stays with the patient until she stabilizes.

How should you code this? In this case, you’ll report the physician services in addition to any applicable injection code(s), in this case 96372 (Therapeutic, prophylactic, or diagnostic injection (specify substance or drug); subcutaneous or intramuscular).

As in other situations when the provider renders an E/M service, such as established patient visit 99214 (Office or other outpatient visit for the evaluation and management of an established patient…), simultaneously with a procedure, modifier 25 (Significant, separately identifiable evaluation and management service by the same physician or other qualified health care professional on the same day of the procedure or other service) must be appended to 99214.

Generally, the physician treats the patient with epinephrine (which you can bill using HCPCS supply code J0171), the intermuscular administration code and the appropriate E/M service.

Important: If your patient has a severe reaction and the practitioner spends a minimum of 30 minutes stabilizing the patient, you may document and report the critical care (99291, +99292) along with any other separately reportable services as necessary. In all cases, documentation should clearly explain the patient’s condition to justify reporting the additional E/M code(s).

Scenario 2: Report Inpatient Code

The physician is examining a cancer patient when the patient suddenly has a seizure and falls on the floor where he hits his head. The doctor administers emergency care while waiting for an ambulance to take the patient to the hospital.

How should you code this? In most situations, you’ll simply report a standard E/M code (99201-99215), provided the E/M service rendered and documented by the physician was appropriate for selecting that level of service based on the history, exam, and medical decision-making. The situation probably does not warrant critical care services (99291-+99292), and the emergency department codes (99281-99285) cannot be billed in the physician’s office.

Alternative:  If the oncologist subsequently sees the patient in the hospital and admits him later that same day, you should report only one E/M service per calendar day. Therefore, you’ll include any outpatient services in your initial hospital care with a code from the 99221-99223 (Initial hospital care, per day, for the evaluation and management of a patient …) range.

F2F reminder: Remember, however, that to report the initial hospital service (99221-99223), the oncologist must provide a face-to-face encounter in the hospital setting.

Scenario 3: Know What ‘Intensive Care’ Really Means

A physician sees a patient in the intensive care unit (ICU) of a hospital. He circles critical care code 99291 due to the location of the service. However, in this situation the patient doesn’t exhibit the three specifications of coding critical care.

How do you code this? You cannot bill the critical care codes (99291, +99292) simply because the place of service is the ICU. Critical care is not based on the location of service, but instead, the term describes a type of care. Remember, these two codes must be in line with the aforementioned criteria, not the place of service.

Better option: If the physician evaluates a patient in the ICU but does not perform critical care services, you’ll report an initial hospital care code such as 99221 or an appropriate subsequent hospital care code (99231-99233).

“Note that the time the physician spends with a given patient may not be continuous, that is, the physician may spend 20 minutes, leave, and then come back and provide services for say another 15 minutes,” advises Abbey. “This time can be accumulated, but documentation of the time and type of services becomes critical. See also the need to distinguish between services such as CPR (cardiopulmonary resuscitation) and critical care.”

Final takeaway: “E/M coding for physicians and practitioners for services provided in the hospital setting can be confusing and complex,” admits Abbey. “Physicians, as well as coding staff, need to be constantly vigilant to make certain that the documentation provided supports the E/M coding. Coding staff should and must work with physicians to improve documentation when problematic situations arise.”